Fujian Fangda Weighbridge recently shipped an order to Colombia that's worth a closer look: one 3 × 18 m, 100-ton truck scale, several 1.5 × 1.5 m, 3-ton small platform scales, and a mobile steel-structure foundation with approach ramps. The project was a bit different from our usual installs, particularly because of that foundation choice.
Like many overseas customers, this one came with a specific set of requirements: weigh full trucks as well as smaller loose goods, avoid heavy civil work on a site with limited conditions, and keep the option of relocating the equipment later.
Put together, those requirements shaped the whole solution — a large scale for vehicles, small scales for everything else, and a foundation approach that didn't depend on poured concrete.
This scale has a deck 18 meters long and 3 meters wide with a 100-ton capacity, designed for heavy trucks and long trailers. At 18 meters, most long vehicles can sit fully on the deck in a single weighing, avoiding the extra effort and potential error of weighing axle by axle.
For sites weighing bulk cargo frequently, a single-pass, single-reading workflow is better for both efficiency and data reliability. The deck is manufactured in sections to make sea container loading practical, then assembled on site.

The order also includes several compact 1.5 × 1.5 m scales rated at 3 tons. These are well suited to pallets, bagged goods, and small batches of loose cargo, and can be placed in warehouses, loading areas, or workshops close to where the goods are handled.
The pairing makes practical sense: full vehicles go on the large scale, smaller loads go on the small ones. Nobody has to compromise — the big scale isn't tied up weighing small items, and small loads aren't weighed on equipment oversized for them, which can hurt accuracy.

This is the part of the project I'd like to spend a bit more time on. A conventional weighbridge foundation means excavation, poured concrete, and curing time — and once it's built, it stays where it is. For projects where site conditions may change, or where relocation is possible, that approach isn't very flexible.
A mobile steel-structure foundation takes a different route: a steel frame replaces the concrete base and sits directly on level, hardened ground. The main advantages:
● No major excavation or concrete pouring, so installation time is noticeably shorter
● The whole structure can be disassembled and relocated when the site changes
● Lower site-preparation requirements, which suits temporary or leased locations
It does come with prerequisites — the ground needs to be level with adequate bearing capacity, and the method of securing the foundation to the site has to be properly designed rather than improvised. We confirmed each of these with the customer during the planning stage.

Because this is an above-ground installation, the deck sits at a height above the surrounding ground, which makes ramps necessary. The slope, width, and load capacity of the ramps directly affect how smoothly and safely vehicles drive on and off. Too steep, and vehicle impact increases, shortening the life of both the deck and load cells; too shallow, and the footprint becomes excessive.
On this project, the ramps were designed together with the mobile steel foundation so vehicles can approach the deck smoothly and centered — a small detail that goes a long way toward avoiding problems later.

The full set of equipment was reinforced and packed to meet sea freight requirements. Deck sections were shipped separately, while foundation components, ramps, and accessories were grouped by type and clearly labeled to make checking and assembly easier on arrival. We also provide installation guidance and ongoing technical support, with remote communication available for any on-site questions.
For export projects, the equipment itself being sound is only the starting point. What matters more is whether the solution fits the customer's actual site and how they plan to use it. On this Colombian project, pairing large and small scales covered different weighing needs, while the mobile steel foundation addressed site flexibility — which makes it a fairly representative example of how we approach custom orders.
Fujian Fangda Weighbridge regularly supplies customized weighing solutions to customers overseas. If your project also involves a constrained site or a need for relocatable weighing equipment, feel free to get in touch with your requirements and we can work out a suitable configuration together.
100-ton Weighbridge & Truck Scale